|
Post by Wolf621 on Jul 24, 2017 13:24:05 GMT -5
I doing a body swap.I'm use dakota r/t frame and putting a 51 plymouth suburban on. Have body off and i'm looking at drive train from the back and its not centered. Its over to right side 3 inches. Anyone know of any centering kits or ideas?
|
|
|
Post by casias on Jul 24, 2017 21:47:57 GMT -5
Yep. The Dakota/Durango drivetrain sits at an angle. Throws everyone off. I've never seen anyone try to center one, but if you have the bare chassis, you should be able to take it to a welder who can fabricate custom mounts.
2000 Durango ZL1 AWD 1999 Dakota R/T 6.0/6l90
|
|