verz
New Member
Posts: 15
|
Post by verz on Jan 22, 2013 18:01:24 GMT -5
Heres a better picture, the plate was from a old Chevy truck tubular crossmember I cut off and my friend welded into the hole area of the Dakota xmember. Had to cut out the front for the crossmember because the case of the trans touched preventing it from fully bolting in but my friend got carried away. Its pretty flush with where the hole is but can raise it a bit to prevent cutting the crossmember.
|
|
|
Post by casias on Jan 22, 2013 18:28:07 GMT -5
Hmm. That's what I was wondering. Do you have an idea of your driveline angle yet?
|
|